qrcode

Introduction

 

In waterborne coatings, water-based adhesives, and industrial cleaning formulations, proper substrate wetting is essential for uniform coverage and surface quality.

 

During high-speed coating processes such as roll coating and slot-die coating, limited contact time can lead to poor spreading, craters, edge retreat, and streaks. Mixing, pumping, and high-shear processing may also introduce unwanted foam.

 

What is Rhenafac AB-23?

 

Rhenafac AB-23 is a low-foam wetting agent designed to improve the wetting and spreading of water-based formulations on different substrates.

 

It reduces both static surface tension and dynamic surface tension. Lower static surface tension helps improve surface spreading, while lower dynamic surface tension promotes rapid substrate wetting during high-speed application.

 

Its low-foam characteristics make it suitable for water-based systems where excessive foam from wetting additives is undesirable.

 

Main Application Areas

 

Waterborne Coatings

Helps improve substrate wetting and spreading in waterborne coating formulations, particularly where uniform coverage and surface appearance are important.

 

Water-Based Adhesives

Can be evaluated in water-based adhesive coating and bonding applications where improved substrate contact and wetting are required.

 

Industrial Cleaning

Helps cleaning solutions contact and spread across surfaces. Suitable for evaluation in spray and recirculating industrial cleaning formulations.

 

Common Formulation Challenges and Solutions?

 

Insufficient Wetting at High Coating Speeds

Limited contact time can cause incomplete spreading, streaks, and uneven coverage. Rhenafac AB-23 can help promote rapid wetting under high-speed coating conditions.

 

Poor Spreading on Low-Surface-Energy Substrates

Some low-surface-energy substrates are difficult to wet with water-based formulations, potentially resulting in liquid retraction, cratering, and uneven coverage. Rhenafac AB-23 can help improve wetting and promote more uniform spreading.

 

Foam Interference During Processing

Foam generated during mixing, pumping, and high-shear processing may contribute to pinholes and other surface defects. Rhenafac AB-23 provides low-foam wetting performance, helping minimize additional foam associated with wetting additives.

 

Note: Rhenafac AB-23 is a wetting agent, not a dedicated defoamer. High-shear formulations should still be evaluated with the existing surfactants and defoamer package.

 

Formulation Guidelines

 

Recommended Dosage

0.1–0.5 wt%

 

The appropriate dosage depends on resin chemistry, substrate type, formulation composition, and processing conditions. Laboratory testing is recommended before production-scale application.

 

Key evaluation points include:

Substrate wetting and surface spreading

Cratering and edge retreat

Foam generation and release

Coating appearance

Interaction with other additives

Final coating or adhesive performance

 

For high-speed coating applications, testing under actual or simulated production conditions is recommended. Final dosage should be determined through application testing.

 

Conclusion

 

Rhenafac AB-23 is a low-foam wetting agent for water-based formulations requiring improved substrate wetting and spreading. Its ability to reduce static and dynamic surface tension makes it suitable for evaluation in waterborne coatings, water-based adhesives, industrial cleaning, and high-speed coating applications.

 

If you are experiencing poor substrate wetting, uneven spreading, or foam-related surface defects, contact Super-Vision for sample testing and technical support.

 

Request a Sample | Discuss Your Formulation | Technical Evaluation

Case Information
  • Types
    Product Introduction
  • Date
    November, 2026
  • Author
    SUPER-VISION
Request A Quote
Sample application
Want to get the latest product information or samples? Contact us immediately, our customer service will reply to your message within 48 hours.
tel
Tel/Phone :
  • 0757-22332275
whatsapp
Whatsapp:
position
Address:
  • Unit 3011, 30th Floor, Building 1, Poly Commercial Center, No. 3 Guotai South Road, Daliang Street, Shunde District, Foshan City, Guangdong Province
Get a free quote
Fill out the form below for free quotes, product details, brochures, etc.